Skip to content
Heated Floors

Heated Floor Installation in Toronto

Electric radiant in-floor heating installed under tile and stone — properly zoned, fully tested and programmed so the floor is warm before you are awake.

A heated floor is the upgrade clients tell us they would never build a bathroom without again. It is also one of the easiest things to get wrong, because almost all of the work is buried permanently under tile.

Diamond Tiling installs electric radiant floor heating throughout Toronto and the GTA, including Schluter DITRA-HEAT and equivalent uncoupling-membrane systems. The membrane does two jobs at once: it holds the heating cable at the correct spacing and it isolates the tile from substrate movement, which is why we prefer it over loose cable stapled to the subfloor.

Heated Floors in Toronto by Diamond Tiling
What's Included

Our heated floors scope

Electric radiant heating systems installed under tile and stone for consistent comfort. Properly zoned, tested and programmed so every morning starts on a warm floor.

Electric radiant systems
Programmable thermostats
Zoned comfort
Energy efficient

How DITRA-HEAT systems work

An uncoupling membrane is bonded to the subfloor, and heating cable is pressed into studs moulded into the membrane — no clips, no self-levelling encapsulation needed. Tile is then set directly over top. Because the cable sits within the membrane rather than under a thick pour, the floor heats faster and the assembly stays thin enough to avoid awkward height differences at doorways.

Testing before, during and after

We meter the cable for resistance and continuity before installation, again after it is set in the membrane, and once more after tile is laid. A cable damaged mid-install and discovered after grouting means lifting a finished floor — testing at each stage is what prevents that.

Thermostats and zoning

Each heated area gets its own programmable thermostat with a floor sensor, set to your schedule so the system runs when you need it rather than continuously. Because electric radiant heats the surface directly rather than the air, running costs on a bathroom-sized zone are modest — it is not a whole-home heating system and should not be sized as one.

Recent Work

Projects from this service

A look at the craftsmanship we bring to homes across Toronto and the GTA.

Large-Format Porcelain Floor — Floors in Mississauga, ON
Floors

Large-Format Porcelain Floor

Mississauga, ON

Expansive large-format porcelain flooring laid dead-flat with minimal grout lines.

Porcelain Floor Hallway — Floors in Etobicoke, ON
Floors

Porcelain Floor Hallway

Etobicoke, ON

A crisp porcelain floor flowing through a hallway into a bright living space.

Hexagon Mosaic Floor — Floors in Riverdale, Toronto
Floors

Hexagon Mosaic Floor

Riverdale, Toronto

A detailed hexagon mosaic floor adding a designer touch underfoot.

View full portfolio
FAQ

Heated Floors questions, answered

The questions homeowners ask us most about this service.

Is Schluter DITRA-HEAT worth it over cheaper cable systems?

In our experience yes, for two reasons. The membrane provides uncoupling — it isolates tile from substrate movement, which meaningfully reduces cracking risk — and cable spacing is set by the membrane rather than by hand, so heat distribution is even. Loose-cable systems can work, but they leave more room for installation error you cannot see once tile is down.

How much does heated flooring cost to run?

For a typical bathroom zone the running cost is modest, particularly on a programmed schedule where the system runs a few hours a day rather than continuously. Cost scales with heated area and your electricity rate, so a small ensuite is very different from an open main floor.

Can heated floors go under any tile?

They work under porcelain, ceramic and most natural stone, which conduct heat well. They are not appropriate under all floor coverings — some engineered products have temperature limits. If you have already selected material, tell us and we will confirm compatibility before quoting.

What happens if the heating cable fails?

Quality systems carry manufacturer warranties, and failures in properly installed cable are rare — most failures trace to damage during installation, which is exactly what staged resistance testing catches. The thermostat is the component most likely to need replacement eventually, and it is accessible in the wall rather than buried under the floor.

Service Areas

Heated Floors across the GTA

We deliver heated floors throughout Toronto and the surrounding Greater Toronto Area.

Our Process

A clear path from quote to finished space

No surprises, no mess left behind. Four straightforward steps that keep your project on track and on budget.

01

Consultation

We review your space, materials and vision, then provide a detailed, transparent quote.

02

Design & Layout

We plan tile layout, waterproofing and transitions so every cut and line is intentional.

03

Expert Installation

Our crew prepares substrates, waterproofs wet areas and installs with millimetre precision.

04

Final Walkthrough

We clean, detail and walk the finished space with you to confirm it exceeds expectations.

Request a Quote

Ready to discuss your heated floors project?

Tell us about your space and we’ll provide a clear, transparent quote — no pressure, just expert advice.

Call Now647-774-8449Get a Quote